Step-By-Step Installation - Dacor Modernist DDW24M99 Serie Instrucciones De Instalación

Step-by-step installation

The installation procedure may differ depending on the model.
STEP 1 Select a location
Select a location that meets the following conditions.
• The location must have a solid floor that can support the weight of the dishwasher.
• The location must be near a sink (9.8 ft/3 m) with easy access to the water supply,
drain system, and electrical outlet.
• The location must let you load dishes into the dishwasher easily.
• The location must have sufficient space for the dishwasher door to open easily
and provide enough space between the dishwasher and the cabinet sides (at least
0.1 inch/2 mm).
• The rear wall must be free of obstructions.
Installation in a new location
DACOR_DW9500M_DD68-00197A-01_EN.indd 11
If you install the dishwasher in a new
location, follow these instructions before
installing the dishwasher.
1. Using a hole saw, cut a hole into the side
2. If the base inside the sink cabinet is raised
A
• If you are replacing an old dishwasher,
• You may need to cut a hole in the
B
of the cabinet that holds the sink (A).
above the kitchen floor and is higher than
the connections on the dishwasher, make
a hole in the base inside the cabinet and in
the cabinet side (B).
NOTE
check the existing connections for
compatibility with the new dishwasher
and replace the connections as needed.
opposite side of the cabinet according to
the location of the electrical outlet.
English 11
2017-08-23 8:54:53