Installation
STEP 5 Install the door handle (DDW24T998US/DA only)
Blocking (X)
18
English
DACOR_DW9500M_DD68-00197A-01_EN.indd 18
1. Loosen the hex nuts on the bar handle
Non-Blocking (O)
Before installing the door handle, pull out
the dishwasher from the cabinet and check
if the spring level is set on 4.
16.5-20 lbs (7.5-9 kg)
15-16.5 lbs (7-7.5 kg)
13-15 lbs (6-7 kg)
11-13 lbs (5-6 kg)
0-11 lbs (0-5 kg)
2. Fit the bar handle into the 2 handle
3. Tighten the hex nuts through the holes
4. Grab and move the bar handle slightly
if they are blocking the circle holes.
NOTE
bolts on the door. Make sure the nut
side of the handle faces downwards.
on both sides of the handle using the
hex wrench.
to check if the handle is fixed properly.
2017-08-23
8:54:55