User Interface; Communications Menu - Rain Bird IQ Satellite Guía De Instalación Y Usuario

User Interface

When the LXM-DTC Satellite Controller dial is set to
the IQ COMMUNICATIONS position, the display and
soft-keys are controlled by the DTC-LXM Cartridge.
The User Interface is comprised of a Communications
Menu screen, from which you can select either a set of
configuration screens with fields for configuring DTC-
LXM operating parameters, or diagnostic screens for
viewing errors and performing LXM-DTC Satellite
communication diagnostic tests.

Communications Menu

The Communications Menu screen shown at the right
shows the type and current status of the device you are
using to communicate. When you rotate the dial on
the control panel to the IQ™ COMMUNICATIONS
position, the Device and Status fields show the current
configuration settings. Device options include:
Direct Connect
External Modem
Internal Modem (LXM-DTC-PR only)
20
The Status field will change depending on the current
status of the device and its communication
connection to the IQ central computer. The Status
messages are:
No Modem - Modem device has been selected,
but no modem is available
Idle - On-hook (standby)
Connecting - Call is ringing, dialing, or trying to
connect with the IQ Central Computer
NOTE: By default, the DTC-LXM answers
incoming calls on the first ring. This setting
cannot be changed.
Connected - LXM-DTC Satellite has connected to
a valid, authenticated IQ Central Computer
Communications
Device: <Device>
Status: Idle
1 Config
2 Diagnostics
1 2
IQ LXM-DTC Satellite Controller