Descargar Imprimir esta página

AMH Badger CB Serie Manual Del Usuario página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

This manual provides important information for all personnel involved with the safe installation and
operation of these products. Even if you feel you are familiar with this or similar equipment, you should
We recognize that most companies who use hoists have a safety program in force in their plants. In the
event you are aware that some conflict exists between a rule set forth in this publication and a similar
rule already set by an individual company or local code, the more stringent of the two should take
precedence. Safe Operating Instructions are provided to make an operator aware of unsafe practices
to avoid and are not necessarily limited to the following list:
1.
Make this manual available to all persons
responsible for the installation, operation and
maintenance of these products.
2.
The supporting structures and load-attaching
members used in conjunction with this product must
provide an adequate safety factor to handle the
rated load, plus the weight of the lifting equipment.
This is the customer's responsibility. If in doubt,
consult a registered structural engineer.
3.
Only allow people, trained in safety and operation
of this product, to operate.
4.
Only operate if you are physically fit to do so.
5.
When a "DO NOT OPERATE" sign is placed on
the product, do not operate until the sign has been
removed by designated personnel.
6. Before each shift or operation cycle conduct a visual
and functional inspection for any evidence of
malfunction, maladjustment, damage or excessive
wear.
7. Never use if problems are found by inspection.
8. Lubricate regularly.
9. Do not use hoist if hook latch does not function.
10. Never splice a hoist chain by a bolt between links.
11. Never lift loads greater than the rated capacity
12. Never support the load on the tip of the hook.
13. Never force a hook into place by hammering.
14. Never place your hand inside the throat of a hook.
15. Never insert the point of the hook into a chain link.
16. Never use the hoist load chain as a sling.
17. Never run the load chain over a sharp edge.
18. Never operate when the load is not centered. Do not
"side pull" or "yard."
19. Never operate a hoist with twisted, kinked or
damaged load chain.
20. Never operate hoist if chain jumping, excessive
noise, jamming or binding occurs.
21. Be certain the load is properly seated in the hook saddle and the hook
latch is engaged.
22. When using multiple hoists to suspend a load, each hoist must have a
rated capacity equal to or more than the entire load.
23. Pay attention to the load at all times when operating.
24. Always ensure that you, and all other people, are clear of the path of the
load.
25. Never use for lifting or transporting people and never lift a load over people.
26. Do not use a cheater bar or extender handle on lever operated hoist.
27. Do not swing a suspended load.
28. Never weld or cut on a load suspended by the hoist.
29. Never use the hoist chain as a welding electrode.
MAN-ALLBADGER-11
read this manual before operating the product.
- 2 -
AMH© 2017

Publicidad

loading