Hood Installation; Final Assembly - KOBE IN-02 Serie Instrucciones De Instalación Y Manual De Operación

Hood Installation

19. Release the screws located on each side of the insert.
Adjust the level of the hood casing support according to
the thickness of the base (1/2 thickness plywood
recommended). Tighten the screws to secure as shown
on Figure 7.
20. Install the insert inside the custom wood frame.
21. Make sure the hood casing support is secure before
releasing.
22. For a more secure installation, use the mounting holes
for the rear support which are located at 1-1/2" (38mm)
up from the insert base (screws not provided).
CAUTION
: MAKE SURE HOOD IS SECURE BEFORE
RELEASING.

Final Assembly

23. Install Aluminum Filters. Insert the filters towards the
back of the unit and push up.
24. Make sure the Aluminum Filters are secure before
releasing.
Figure 7
8