Information; Contact Information; Overview; Equipment Summary - Fisher Scientific Isotemp 13-247-10 Manual Del Usuario

Introduction
This manual provides information and procedures on how
to unpack, set up, and operate the Fisher Isotemp brand
of Hybridization Incubators.
This manual is intended to be used by Fisher customers
responsible for operating the hybridization incubator.

Contact Information

Fisher Scientific, 2555 Kerper Blvd. Dubuque, IA 52001
Technical assistance:
(for guidance in using the product)
Instrument service:
(for repairs and replacement parts)
Customer service:
(to order products and accessories)
Copyright 2000, Fisher Scientific. Fisher reserves the right
to change specifications or designs at any time without
incurring obligation.

Overview

Equipment Summary

Fisher Isotemp Hybridization Incubators are designed to
process nucleic and protein blots derived from hybridiza-
tion procedures. Incubator heat is accurately controlled to
precisely maintain the chamber temperature. Temperature
can be set between slightly above ambient and 85°C and
is easily set by simple controls on the front panel. A large,
bright display shows actual temperature during operation.
The incubator features keypad protection, which prevents
the set temperature from being changed. This is useful
when setting up a processing program where the unit will
be unattended. An offset temperature can be programmed
to compensate for the actual temperature inside a typical
sample loaded into the tubes. The incubator can monitor
and store the maximum deviation of the actual tempera-
ture from the set temperature. Temperature deviation can
be monitored and saved during processing and recalled
1-800-943-2006
1-800-395-5442
1-800-766-7000
3