Operation Test - Atlantis OnePower Sx80 Manual De Instrucciones

1.7 Operation Test

 Connect the UPS to the wall receptacle.
 Press the UPS On/OFF [
sounds twice, the UPS will be start-up.
 Connect your computer equipment with sockets of the UPS and pull off the input
power cable of the UPS from the wall receptacle. Meanwhile, please check if
alarm buzzer is beeping (every 2 seconds).
 Try the field working condition by running some application programs on your
computer and repeating step.
 Check if the UPS is initiated properly to support continuous operation.
Connect to Utility and Charging
Plug in the AC input cord to the wall outlet. For the best
results, suggest to charge the battery at least 10 hours
before initial use. The unit charges its battery while
connecting to the utility.
] Switch for approx. 3 seconds, then the Buzzer
Connect to Utility and Charging
Plug in the AC input cord to the wall outlet. For the best
results, suggest to charge the battery at least 10 hours
before initial use. The unit charges its battery while
connecting to the utility.
28
ENG