Faults - Plasma Made GUC 1314 Manual Del Usuario

7. Faults

Incompetent repairs are dangerous – you run the risk of an electric
shock! If the device is faulty, remove the plug from the socket and
contact customer service.
service@plasmamade.com
Fault Possible cause
Device does not The plug is not inserted
work in the socket
Power cut
Blown fuse
Red lamp flashing Overloading of filter.
Blue light slashes The cleaning time of the Turn the hood off. You can re-enable
during the filter is reached
operating mode
Blue lamp The maximum lifetime of Purchase a new filter
flashing the filter is reached
If the error is not resolved after these operations, please refer to our Helpdesk at: www.
plasmamadeservice.com
Solution
Put the plug into the wall socket
Check whether other kitchen equipment is
working
Check in the meter cupboard whether the
device's fuse is intact
Remove power from the filter temporarily
(remove the plug from the socket briefly) –
thereafter the electronics will reset itself
the hood after 1-2 minutes
10