General - Plasma Made GUC 1314 Manual Del Usuario

1. General

Thank you for the purchase of a PlasmaMade Airfilter.
The PlasmaMade Airfilter is intended to remove airborne dust particles, pollen, micro-
organisms (house dust mites, bacteria, viruses and moulds), cigarette smoke and smells
from the air. If the source of the smell is still present, the PlasmaMade Airfilter cannot
remove the smell completely (for example if you are still cooking). Harmful gases (carbon
monoxide etc.) cannot be removed by the PlasmaMade Airfilter.
The PlasmaMade Air Filter features OACS (Ozone Active Control System) and IACS
(Ionization Active Control System) to meet the latest, strictest safety standards.
For more information, please see: www.plasmamade.com.
Traditional air filtering
Extracts dirty air outside. This increases
energy consumption and costs.
Air is only extracted, not cleaned.
Filters must be replaced and/or cleaned.
Often devices that make a lot of noise.
Consumes relatively much electricity.
The PlasmaMade Airfilter produces a very small amount of ozone. This amount lies
well below the permitted value. It may well cause a slight a ionisation smell.
PlasmaMade Airfilter
Works on a recirculation basis. In this way,
no energy or heat is lost.
Smells, pollen, allergens, grease and
other coarse pollutants are filtered out
of the air by means of plasmamade
recirculation.
Self-cleaning filter. No mechanical pre-
filter needed, the filter cleans itself
Makes no noise and in fact has a noise-
reducing effect on the equipment on
which the filter is applied.
Very low power consumption (12 watts)
due to DC technology and a 12 volt
connection.
4