SECTION 9 ERROR CODES
ERROR
DESCRIPTION
CODES
- -OL -
Over range
Err 4
Zero Setting Error
Err 6
A/D out of range
BS series weighing scales user's manual
RESOLUTION
Remove weight from the scale.
If the problem persist contact your dealer or
Taiwan scale for assistance.
The scale was outside the normal zero setting
range either when it was turned on or when the
ZERO key was pressed.
Remove weight from the scale and try again.
Use the TARE key to set the display to zero value.
If the problem persist contact your dealer or
Taiwan scale for assistance.
The values from the A/D converter are outside the
normal range. Remove weight from the scale if
overloaded, make sure the pan is attached.
Indicates the load cell or the electronics may be
faulty.
If the problem persist contact your dealer or
Taiwan scale for assistance.
- 10
-