Specifications; Technical Specifications; Dimensions - Mastervolt AC Power Analyser Manual De Utilización

SPECIFICATIONS

10 SPECIFICATIONS

10.1 TECHNICAL SPECIFICATIONS

Model
Article number
Function of instrument
Manufacturer
Input voltage range 230V (120V) 180–280V (90–145V)
Maximum input current
Input frequency range
Measuring resolutions
Accuracy
Potential free contact
Connections
Current coil included
Configuration and monitoring
Available languages
Number of configurable events 63
MasterBus powering capacity
AC Power consumption
Communication isolation
Software layer
Hardware layer
Weight

Dimensions

Dimensions current coil
Protection degree
10.2 DIMENSIONS
Figure 12: Dimensions in mm [inches]
18
AC Power Analyser
77031200
Measuring AC voltage, current, power, frequency and energy
Mastervolt Amsterdam the Netherlands
0–5 A, multiplied by transformer ratio
30–70 Hz
Refer to chapter 6
Linear +/- 1%, non-linear +/- 5%,
5A 250V relay max
AC input, potential free relay contact: max 2.5 mm 2 cable, current coil connector:
max 1.5 mm 2 cable
100:5
By means of external display or PC screen
English, Nederlands, Deutsch, Francais, Castellano, Italiano, Norsk, Svenska, Suomi, Dansk
yes, if AC is available
10 mA @ 230V AC
Galvanic
MasterBus proprietary protocol
CAN bus technology
530 g (1.17 lbs)
Refer to section 10.2
80 x 60 x 30 mm (3.14 x 2.36 x 1.18 inch), max cable diameter 28 mm (1.1 inch)
IP65
168 6,59
182 7,15
February 2011 / AC Power Analyser / EN