Stove Positioning; Notes For Correct Operation; Fuse; Mounting Instructions For The Stone Covering - monolith EXTRA Manual Del Usuario

STOVE POSITIONING

For the correct operation of the product, it is recommended to position it in a way that it is perfectly level, with the aid of a spirit level.

NOTES FOR CORRECT OPERATION

For the correct operation of the pellet stove, the following
indications must be respected:
During the operation of the stove, the pellet hopper lid and the
door must always be closed.
Failure to comply with the above during operation will cause the
display to show the following:
"CLOSE HOPPER DOOR"
This indication means that you have 60 seconds to close the
hatch/door and the pellet lid.
After the 60 seconds the stove, during the ignition phase, will go
to "DEPRESSION ALARM" mode, while during normal operation
the stove will go to "COOLING WAIT" mode and then re-start
automatically when the correct conditions are present (stove
cold, etc.).

FUSE

If there is no power supply to the stove, check the
state of the fuse located in the box between the
stove switch and the power cable connection.

MOUNTING INSTRUCTIONS FOR THE STONE COVERING

MOUNTING INSTRUCTIONS OF THE STONE COVER ARE SUPPLIED WITH THE NATURAL STONE ELEMENTS AND MUST
BE READ BEFORE INSTALLING THE STOVE.
62
Pellet hopper lid
ENGLISH
Fire door