Initial Operation - Skandika Walkingpad Manual Del Usuario

3. Initial operation

1. Place the WalkingPad on a flat and 2. Unfold the WalkingPad slowly and
completely.
even ground, never on thick carpets or
other soft surfaces. DO NOT connect
mains power by now.
4. Connect power cord and press 5. Search ''Walkingpad" App from
the button to switch on the Apple Store or Google Play and
device. complete installation.
07
3. Check and adjust the walking belt
to make sure it's centered.
6. Open the App, follow the prompts
to set up the device.
7. Enter Novice Guide. 8. Complete Novice Guide to
unlock all functions (e.g.
maximum speed 6 km/h instead
of 3 km/h).
10. If the belt does not run centered, it 11. Short press: return to previous mode.
needs to be adjusted - check
Long press: switch to standby mode.
chapter "6.Maintenance and
Service" .
9. Start to use the WalkingPad.
Mode Switch
08