Foreword - Zehnder ComfoConnect KNX C Manual Del Usuario

Foreword

Read this document carefully before use.
With this document you can install, commission and
perform maintenance on the ComfoConnect KNX
in a safe and optimal manner. In this document the
ComfoConnect KNX will be referred to as "the unit".
The unit is subject to continuous development and
improvement. Thus the unit may be slightly different
from the given descriptions.
The next pictograms are used in the Zehnder
documents:
Symbol Meaning
Point of interest.
Risk of compromised performance or damage of
the ventilation system.
CHANGED
SAME
Risk of personal injury.
Questions
Speak to your supplier when you have any questions
or would like to order a new document. The contact
details of the manufacturer can be found on the back
page of this document.
The unit is CE approved and manufactured by:
Zehnder Group Nederland B.V.
Lingenstraat 2 • NL-8028 PM Zwolle
T +31 (0)38 429 6911 • F + 31 (0)38 422 5694
Company Register of Zwolle 05022293
All rights reserved.
This documentation has been made with the utmost care. The publisher cannot be held liable for any damage
caused as a result of missing or incorrect information in this document. In case of disputes the English version of
the instructions will be binding.
12 - EN
Electrical dangers
There is a risk of electric shock during
installation or maintenance. Always
comply with the safety regulations
in this manual. Personal injury or
damage to the unit can arise from non-
compliance with the safety regulations,
warnings, comments and instructions
in this manual. Disconnect the power
supply to the ComfoAir Q, Comfort Vent
Q or AERISnext (hereinafter referred
to as the "ventilation unit") before
connecting up or removing something
from the unit.