Zyxel NSA210 Manual Del Usuario página 7

3. Press the power button on the front of the NSA210 to turn it on. Look
at the front panel lights.
If no lights turn on, make sure the power cord is not loose
and that the power source is turned on.
• The power button light turns steady blue.
• The SYS light turns steady green after a
successful startup (it takes about 50
seconds).
• The HDD lights come on if the NSA210
detects hard drives in the disk bays.
• The rear panel LAN port has a light that turns on if the Ethernet port
is properly connected to your network. It blinks while sending or
receiving traffic.
To turn off the NSA210, press the power button in and hold it until you
hear a beep. Then release the button.
Access the NSA210
Use the NAS Starter Utility to access the NSA210. Follow these steps:
1. Insert the included CD into your CD-ROM drive. Click Setup in the
screen that displays. Then click the NAS Starter Utility link.
If this screen does not display, use Windows Explorer (My
Computer) to go to the CD-ROM. Double-click setup.exe.
ENGLISH
7