Braun Oral-B OXYJET PRO SMART Serie Manual Del Usuario página 14

Note: After deep discharge, the charge indicator
might not flash immediately; it can take up to
30 minutes.
• If the battery is running low, the red charge
indicator light (12) is flashing for a few seconds
when turning your toothbrush on/off and the
motor is reducing its speed. Once the battery is
empty, the motor will stop; it will need at least a
30-minute charge for one usage.
• You can always store the handle on the plugged-
in charger base; a battery overcharge is
prevented by device.
Note: Store handle at room temperature for
optimal battery maintenance.
Caution: Do not expose handle to temperatures
higher than 50 °C. Recommended ambient
temperature for charging is 5 °C to 35 °C.
Brushing techniques
Wet brush head and apply any kind of toothpaste.
To avoid splashing, guide the brush head (17) to
your teeth before switching on the appliance (j).
When brushing your teeth with one of the Oral-B
oscillating-rotating brush heads guide the brush
head slowly from tooth to tooth, spending a few
seconds on each tooth surface (n). When using the
Oral-B «TriZone» brush head place the toothbrush
bristles against the teeth at a slight angle towards
the gumline. Apply light pressure and start brushing
in back and forth motions, just like you would do
with a manual toothbrush.
With any brush head do not forget to brush all
3 surfaces of your teeth: chewing, outer and inner
surfaces. Brush all four quadrants of your mouth
equally. You may also consult your dentist or dental
hygienist about the right technique for you.
In the first days of using any electric toothbrush,
your gums may bleed slightly. In general, bleeding
should stop after a few days. Should it persist after
2 weeks, please consult your dentist or dental
hygienist. If you have sensitive teeth and/or gums,
Oral-B recommends using the «Sensitive» mode
(depending on model) (optional in combination with
an Oral-B «Sensitive» brush head).
Brushing modes (depending on model)
1- 2- 3-
mode modes modes
✓ ✓ ✓ ✓ ✓
Brushing
4- 5-
modes
modes modes
(for handle type
3767)
Daily Clean –
Standard for daily
mouth cleaning
✓
Pro Clean –
For an extraordi-
nary clean feeling
(operated with a
higher frequency)
✓ ✓ ✓ ✓
✓ ✓ ✓
How to switch between modes:
Your toothbrush automatically starts in the
«Daily Clean» mode. To switch to other modes,
successively press the on/off button (15). Switch off
the toothbrush by holding the on/off button until the
motor stops.
Note: You can set/advance the mode functionality
TM
via Oral-B App.
Professional Timer
A short stuttering sound at 30-second intervals
reminds you to brush all four quadrants of your
mouth equally (k). A long stuttering sound indicates
the end of the professionally recommended
2-minute brushing time. If the toothbrush is turned
off during brushing, the elapsed brushing time will
be memorised for 30 seconds. When pausing
longer than 30 seconds the timer resets.
Note: You can set/advance the timer functionality
TM
via Oral-B App.
Pressure sensor
If too much pressure is applied, the pressure sensor
light (16) will light up in red, notifying you to reduce
pressure (l). In addition the pulsation of the brush
head will stop and the oscillation movement of the
brush head will be reduced (during «Daily Clean»,
and «Sensitive» mode). Periodically check the
operation of the pressure sensor by pressing
moderately on the brush head during use.
Brush heads
Oral-B offers you a variety of different Oral-B brush
heads that fit your Oral-B toothbrush handle.
Our oscillating-rotating brush heads can be
used for tooth-by-tooth precision cleaning.
Oral-B CrossAction brush head
Our most advanced brush head. Angled
bristles for a precise clean. Lifts and
powers away plaque.
Oral-B FlossAction brush head
features micropulse bristles that allow
for an outstanding plaque removal in the
interdental areas.
Sensitive
Gentle, yet
thorough cleaning
for sensitive areas
Whitening –
Exceptional
polishing for
occasional or
everyday use
✓ ✓
Gum Care –
Gentle massage of
gums
–
15