Lens
Probe
Lens cover
CONVERSION FAHRENHEIT TO CENTIGRADE
The thermometer is initially set at Fahrenheit ˚F.
1. In the off position with lens cover applied, press and hold the button
for three (3) seconds until the "˚F" flashes you will hear one beep.
2. Press button again, the "˚C" flashes.
3. After five (5) seconds the unit will turn off. The desired mode
has been set. Repeat the process to reverse measurement scale if desired.
NOTE: Changing the measurement scale deletes the previous
measured value.
KNOW YOUR UNIT
TITLE
Button
Display
Storage case
(°F/°C)
Lens
Probe
Box with 21 lens covers
6 6