VWR High Performance Guia De Inicio Rapido página 5

To remove a tip-ejector extention:
Gently twist the extention

Pull it away from the pipette

Ejector spacer for Multichannel models (X10µL only)
Multichannel models fit with long collar tips. If you use
short collar tips, you might have to insert the ejector
spacer especially indicated for that:
• Remove the tip-ejector, keep both ejector locks
depressed; pull the tip-ejector down.
• Insert the broad ejector spacer and click it to the tip-
ejector.
• To refit the tip-ejector, gently re-insert the tip-ejector
vertically into the rails of the ejector support.
Long collar tips
FIGURE 3
QUICK START GUIDE
Ejector spacer
Short collar tips
5
EN