NEILPRYDE ONE-DESIGN Manual Del Usuario página 7

NEILPRYDE – ONE DESIGN RACING
All NeilPryde ONE-DESIGN products: board, daggerboard, fin, foil, sail, mast,
boom, extension and base have been build to 'one design' specifications as set
out by the rules of their respective International One-Design Class Association.
All NeilPryde ONE-DESIGN products are supplied with a quality serial number,
proving that this component has met the required production specifications.
Excluding standard production tolerances, each and every product is built to
exactly the same specifications as another.
If you wish to enter into an International One-Design Class racing event, you
must use exactly those products as specified by the racing rules of their
respective International One-Design Class Association. Furthermore, these
components must not have been modified in any shape or form, and any
modification found by an International One-Design Class approved measurers
may disqualify you from an International One-Design Class Association racing
event.
Particular attention should be paid to the 'water transfer' printed to the bottom
surface of the boards. Any modification to the bottom surface of the board will
remove this transfer, and make this modification visible to the naked eye. Any
removal of this transfer over a wide surface area of the board may disqualify you
from International One-Design Class Association racing events.
For further information on the class rules of the One-Design racing classes,
please go to www.neilpryde.com or the World Sailing website, www.sailing.org
07