Getting Started - Dragon Touch Vision 4 Manual Del Usuario

1. Shutter / Select Button
2. Power / Mode / Exit Button
3. Charging Indicator
4. MicroSD Slot
5. Micro USB Port
6. Micro HDMI Port
7. External Mic Port
Note: Camera does not record sound when it is in the waterproof case.

GETTING STARTED

Welcome to your new Vision 4. To capture video and photos, you need a microSD card
(sold separately).
MICROSD CARDS
Use brand name memory cards that meet these requirements:
• microSD, microSDHC, or microSDXC
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
03
14 14
8. Lens
9. Screen
10. Charging Indicator
11. Working Status Light
12. Up / Wi-Fi Button
13. Down Button
14. Battery Door
Note: Please format the microSD card first in this camera before using. To keep your
microSD card in good condition, reformat it on a regular basis. Reformatting erases all of
your content, so be sure to offload your photos and videos first.
POWERING ON AND OFF
To Power On:
Press and hold the Mode button for three seconds. The camera beeps while the camera
status light is on. When information appears on the LCD display or the camera status screen,
your camera is on.
To Power Off:
Press and hold the Mode button for three seconds. The camera beeps while the camera
status light is off.
SWITCHING MODE
To Switch Mode:
Press the Mode button to switch the mode.
EXITING MODE
To Exit Mode:
Press the Mode button to exit mode.
TURNING ON / OFF Wi-Fi
To Turn On Wi-Fi
Turn on camera, press Up button once. Wait for 3 seconds. The screen shows
'SSID:DragonTouch_Vision4'. Then you turn on Wi-Fi successfully.
To Turn Off Wi-Fi
Press Up button to turn off Wi-Fi.
04