Dragon Touch Vision 4 Manual Del Usuario página 8

3. Exposure: 2 / 1.7 / 1.3 / 1 / 0.7 / 0.3 / 0 / -0.3 / -0.7 / --1 / -1.3 / -1.7
Default setting is 0.
By default, your camera uses the entire image to determine the appropriate exposure level.
However, Exposure lets you select an area that you want the camera to prioritize when
determining exposure. This setting is particularly useful in shots where an important region
might otherwise be over- or underexposed.
When you change this setting, the LCD display immediately shows you the effect on your
image. If you change modes, the camera returns to using the entire scene to determine
the correct level of exposure.
4. White Balance: Auto / Daylight / Cloudy / Fluorescent / Incandescent
Default setting is auto.
White Balance lets you adjust the color temperature of videos and photos to optimize for
cool or warm lighting conditions. When you change this setting, the LCD display
immediately shows you the effect on your image.
5. ISO: Auto / 100 / 200 / 400 / 800 / 1600 / 3200
ISO determines the camera's sensitivity to light, and creates a trade-off between brightness
and resulting image noise. Image noise refers to the degree of graininess in the image.
In low light, higher ISO values result in brighter images, but with greater image noise.
Lower values result in lower image noise, but darker images. When you change this
setting, the LCD display immediately shows you the effect on your image.
6. Effect: Normal / Sepia / B&W / Negative
Default setting is normal.
7. Contrast: -100 - +100
Default setting is 0.
8. Saturation: -100 - +100
Default setting is 0.
11
9. Sharpness: -100 - +100
Default setting is 0.
Sharpness controls the quality of details captured in your video footage or photos. When
you change this setting, the touch display immediately shows you the effect on your image.
SYSTEM SETTING
1. Language: English / Spanish / German / Italian / French /
Sets the language that appears on the camera.
2. Car Mode: On / Off
Default setting is off.
If you turn on car mode and connect camera with car cigarette lighter, the camera will turn
on automatically if you start your car and will turn off if you stop your car.
3. Power Off: Off / 1 Min. / 3 Min. / 5 Min.
Default setting is 3 minutes.
Powers off your Vision 4 after a period of inactivity to save battery life.
4. Date & Time: MM / DD / YY, HH / MM / SS
The date and time are automatically updated when you connect your camera to the Live
DV app. However, you can manually change these settings, if needed.
Note: If the battery is removed from the camera for an extended period of time, the date
and time will be reset automatically.
5. Date Format: None, YYYY MM DD, MM DD YYYY, DD MM YYYY
Default setting is MM DD YYYY.
If you turn on Date Stamp, this camera adds date stamp to the videos or photos you take.
If you select None, this camera will not add date stamp to the videos or photos you take.
6. Frequency: 50 Hz/ 60 Hz
Default setting is 50 Hz.
/
12