Functions - Steren CCTV-255 Manual De Instrucciones

DISP
It lets you know which version of software includes the adapter.
Press DISP, U008 appear on the screen, the last two numbers indicate which
version of program is installed.
Press DISP a second time and the display must show the protocol and baud
rate. d = protocol type, 24 = 2400 baud rate (bps).
SETUP
Setting the protocol and the transfer rate
Press SETUP for 3 seconds, the display shows the current speed and
protocol.
To change the protocol, press the up or down buttons. You can select from
Pelco-P and Pelco-d.
To change the transfer rate, press the left or right buttons. You can choose
between 1200, 2400, 4800, 9600. Press ENTER to confirm.

Functions

17