Camera Movement - Steren CCTV-255 Manual De Instrucciones

Camera movement

Press the CAM, then the number of the camera to control. If you need to
enter numbers greater than 9, use the -/-- button.
To pan, use the arrow keys. Depending on the selected speed, the camera
will move faster or slower.
You can set particular points to which the camera moves when you press
a button or a button combination. To set a predetermined point, hold down
the PRESET button for three seconds until you see Set- in screen. Enter the
point number to configure. If you need to enter a number larger than 9, use
the -/-- button. Press ENTER to confirm.
To go to a predetermined point, press SHOT button followed by the number
of point you want to aim the camera. If you need to enter numbers greater
than 9, use the -/-- button.To go to points 1 to 8 can use the P1 to P8 keys.
HOME A B
RUN
AUTO
SPEED
ZOOM+
OPEN
FOCUS+
You can also set HOME points A and B. HOME is the reference point for your
camera. Points A and B is a limit to the automatic scanning mode. To define
these points, follow the same procedure to save set points, but instead of
entering a number, press the key you want to program (HOME, A or B).
19