Troubleshooting - Aircare H12 Serie Guía De Uso Y Cuidado

SUMMER STORAGE
1. Clean unit as outlined in Care & Maintenance section.
2. Discard used wick and any water in the reservoir or bottles and allow to dry
thoroughly before storage. Do not store with water inside reservoir or bottles.
3. Do not store unit in an attic or other high-temperature area, as damage will
occur.
4. Install new filter at beginning of season.

TROUBLESHOOTING

Trouble
Unit does not operate
on any speed setting
Motor does not Turn
On.
Probable Cause
No power to unit.
Unit has run out of water
– fan will not operate
without water is present.
Refill switch
operation/improper
positioning of float assy.
Check motor/fan
operation.
9
Remedy
Ensure polarized plug is fully inserted
in wall outlet.
Refill water bottle.
Ensure float assembly is correctly
positioned as described in
"Important Filling Instructions", page 4
CAUTION: Do not touch the fan
when accomplishing this test, as the
motor may turn on.
To test the motor, turn unit ON and
turn all dials fully ON.
Turn the chassis over and insert
finger into tab where float rod is
supposed to go. If fan turns on, the
fan and motor are working correctly.