OZ Lifting Products ELECTRIC Serie Manual Del Operador página 18

REPAIR PARTS ORDERING INSTRUCTIONS:
This parts and instruction manual contains information required to install and maintain your hoist. To
insure prompt service, each repair parts order should be placed with OZ Lifting Products, LLC, and must
contain the following information:
1. Serial number and Model number from the OZ hoist name plate, located on the side of the hoist.
2. Hoist capacity from the hoist name plate, located on the side of the hoist.
3. Voltage, Amp and Horse Power from the hoist name plate, located on the side of the hoist.
4. Hoist Speed from the hoist name plate, located on the side of the hoist.
5. Part name from the part list.
6. Item number of part from the part list.
7. Part number from the part list.
8. Quantity of parts requested.
Note: When ordering replacement parts, it is recommended that consideration be given to the need for
also ordering such items as gaskets, fasteners, seals, etc. These items may be damaged or lost during
disassembly or just unfit for future use because of deterioration from age or service.
Use of commercial or other manufactures' chain and parts to repair OZ Hoists may cause
WARNING
load loss. To avoid injury: Use only factory supplied replacement load chain and parts.
Chain and parts may look alike, but factory original chain and parts are made of specific
materials or processed to achieve specific properties.
EN pg.18