Error Messages - palintest Micro 800 Instrucciones De Operación

Micro 800 Conductivity/TDS/Salinity Operating Instructions

Error Messages

"ERR" will appear when an error
condition exists or the incorrect key is
pressed. Common examples include:
• Pressing ENTER during calibration before the
"READY" indicator appears. Wait for the
"READY" indicator before pressing ENTER.
• UR (Under Range).
• OR (Over Range).
Intended Use, Maintenance
& Precautions
These handheld meters use sensors to detect various
parameters for water-based measurements. For
routine maintenance disconnect the power cord or
Instrument Operating Conditions
Operating Ambient Temp.
Operating Relative Humidity
Storage Temp.
Storage Relative Humidity
Pollution
Overvoltage
Weight
Size (L x W x H)
Regulatory & Safety
Power Rating
Battery Requirement
Vibration
Shock
Enclosure (Designed To Meet)
Universal Power Adapter Operating Conditions
Operating Ambient Temp.
Operating Relative Humidity
Storage Temp.
Storage Relative Humidity
Pollution
Overvoltage
Power Rating
4
battery, then dust or wipe the display using a damp
cloth. If necessary, warm water or a mild water based
detergent can be used. Immediately remove any
spilled substance from contact with the meter using
the proper cleaning procedure for the type of spill.
• Do not use this equipment in potentially
explosive atmospheres.
• Refer to the electrode instructions for use,
storage and cleaning.
• Ensure that no liquid enters the instrument.
• Do not use any aggressive cleaning chemicals
(solvents or similar agents).
• There are no user serviceable parts inside. Attempts
to service internal parts may void the warranty.
• WARNING: No modification of this
equipment is allowed.
5 to 45ºC
5 to 85%, non-condensing
-20 to +60ºC
5 to 85%, non-condensing
Degree 2
Category II
500g
21.15 x 9.87 x 5.85cm
CE, TUV 3-1, FCC Class A
DC Input: 9 VDC 1 A
2 x AA (LR6) 1.5V batteries (replace batteries when battery sign blinks)
Shipping/handling per ISTA #1A
Drop test in packaging per ISTA #1A
IP67 (using rubber covers)
0 to 50ºC
0 to 90%, non-condensing
-20 to +75ºC
0 to 90%, non-condensing
Degree 2
Category II
I/P: 100 - 240 V, 50/60 Hz, 0.3A O/P: 9 VDC 1 A