Error Messages - palintest Micro 800 MULTI Instrucciones De Operación

Micro 800 pH mV Operating Instructions

Error Messages

"ERR" will appear when an error
condition exists or the incorrect key is
pressed. Common examples include:
• Pressing ENTER during calibration before the
"READY" indicator appears. Wait for the
"READY" indicator before pressing ENTER.
• UR (Under Range).
• OR (Over Range).
Intended Use, Maintenance
& Precautions
These handheld meters use sensors to detect various
parameters for water-based measurements. For
routine maintenance disconnect the power cord or
4
battery, then dust or wipe the display using a damp
cloth. If necessary, warm water or a mild water based
detergent can be used. Immediately remove any
spilled substance from contact with the meter using
the proper cleaning procedure for the type of spill.
• Do not use this equipment in potentially
explosive atmospheres.
• Refer to the electrode instructions for use,
storage and cleaning.
• Ensure that no liquid enters the instrument.
• Do not use any aggressive cleaning chemicals
(solvents or similar agents).
• There are no user serviceable parts inside. Attempts
to service internal parts may void the warranty.
• WARNING: No modification of this
equipment is allowed.