Publicidad
Idiomas disponibles
Idiomas disponibles
Introduction
Dear customer
Thank you very much for purchasing this collaxx colour light
unit. You have acquired a unique Austrian quality product.
Through constant development and research, our innovative
team vouches for high quality standards.
Based on LED technology, collaxx colour light units produce
an intensive and pure colour light. They combine low energy
consumption
with
absolutely
extremely high temperature resistance and light intensity.
To round off our proposal, we ensure that the match between
collaxx colour light units and their application on the one
hand and the requirements and wishes of our customers
on the other is optimal.
Your collaxx colour light unit allows you to create your own
individual feel-good atmosphere. Activate your energy
potential with our collaxx colour light unit and experience
for yourself how colours touch people.
With colourful greetings
Your collaxx team
Disclaimer of liability
The manufacturer does not accept any liability for incorrect,
incomplete or omitted information or translation errors in
this installation and operation manual.
Subject to modification.
Safety warning
Please do not replace the battery in your remote control!
The battery is a special high temperature resistant type of
battery and firmly soldered into the remote control. It is not
available from a dealership and must be replaced exclusively
by the manufacturer. Attempts to replace the battery may
cause an explosion or the spillage of hazardous liquids.
8
flicker-free
operation,
Product contents
The package includes the following elements – cf. also fig.
Ⓐ on page 2.
ΠColour Light Appliance
• Power supply unit
Ž Remote Control (optional)
• 2 Erection Bolts
• Installation and operation manual
' Drilling/size template
' Colour manual
" Moodies code
Installation instruction
Please use the enclosed drilling/size template to help you
with the installation! The letters a to c below refer to the
features of the drilling/size template.
1. Hold the drilling/size template against the surface where
you wish to install the lamp.
Do not mount the lamp directly above a sauna
stove – risk of overheating!
2. Drill a hole with a diameter of at least 13mm for the
power supply cable in the position marked a.
3. If your lamp is equipped with a control cable supplied
loose, you will need a hole with a diameter of at least
10mm at the point marked b
4. At high sauna temperatures, the lamp will dim
automatically for its own protection; if you wish to
diminish this effect, you may cut out the rectangular
ceiling break c, instead of bores a and b, which will
lead to the lamp being cooled down by the external air
5. Feed the power supply cable from above through the
hole in the ceiling and plug it into the lamp
6. Position the lamp appropriately and carefully pull the
cable back so that it is neither caught nor unplugged.
7. Mount lamp with the two erection bolts provided
8. Plug the power supply unit into the mains socket.
Publicidad
