Mounting Instruction - Nederman 883 Manual De Instrucciones

Ocultar thumbs Ver también para 883:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
EN
Hose Reel Series 883
1
Preface
This manual is for the correct installation, use and maintenance of this product.
Read it carefully before using this product or carrying out maintenance.
Replace the manual immediately if lost.
This product has been designed to meet the requirements of relevant EC
directives. To maintain this status, all installation, repair and maintenance
work for this product is to be carried out by qualified personnel using only
original spare parts. Contact the nearest authorized distributor or Nederman for
advice on technical service and obtaining spare parts.
Nederman continuously improves its products' design and efficiency through
modifications, and reserves the right to do so without introducing these
improvements to previously supplied products. Nederman also reserve the right
to, without previous notice, modify data and equipment as well as operating
and maintenance instructions.
2
Notices
This document contains important information that is presented either as a
warning, caution or note. See the following examples:
WARNING!
Warnings indicate a potential hazard to the health and safety of personnel, and
how that hazard may be avoided.
CAUTION! Type of risk.
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE!
3
Applications
Check max. working pressure (MPa) on the type label of the reel. Ambient
temperature: -10 °C - +60 °C, see Figure 1.
4

Mounting instruction

The reel can be wall-, floor- or ceiling mounted, see Figures 2 and 3. Maximum
installation height above floor level is 4 m. Choose a way of mounting to avoid
excessive bending of the hose against the outlet rollers (A).
Select a level surface on which to mount the reel and use the template on the
side of the packing to mark the holes. Ensure that suitable fixing bolts are used
and that they are secure. The bolts must each stand a torque force of minimum
3800 N.
When choosing mounting place it should be notified that the lifetime of the
hose reel can be reduced by the influence of chemicals and strong UV- or heat
radiation.
12
Type of injury.
Notes contain other information that is important for personnel.

Publicidad

Tabla de contenido
loading

Tabla de contenido