Briteq BT-150LS Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
15
ROTATING GOBOS
Gobo wheel contains 7 standard rotating gobos (gobo size: 26,8mm – image size: 22,0mm) + Open
These gobos can be replace by your own custom gobos, both metal and glass gobos can be used.
Replacing the gobos:
 Switch the projector off, unplug the power cable and wait until the unit is cool.
 Remove the plastic cover of the head using a Phillips screwdriver (PH2)
 Locate the gobo wheel with rotating gobos.
 Each of the rotating gobos is mounted in a separate holder that can be easily removed from the wheel
just by lifting it up a little and tear it out.
 The gobo is fixed in the holder using a wire clip: remove the wire clip gently.
 Remove the gobo and replace it by a new one
 Put the wire clip back in place and click the holder back in the gobo wheel.
 Put the plastic cover of the head back in place using a Phillips screwdriver (PH2)
 Done.
OPERATE THE UNIT BY CA8 OR RF8SET
When used in standalone or master/slave mode we strongly advise you to use the CA-8 "Wired easy
controller" or RF-8SET "Wireless easy controller".
 CA-8 wired remote: Connect the controller to the jack input of the first unit (master).
 RF-8SET wireless remote: the wireless remote has two parts:
 RF-8T: small RF-transmitter that can control up to 5 effects.
 RF-8R: small RF-receiver that should be connected to the DIN 5pin input of
the BT-150LS. See the installation manual of the receiver for more
information.
Now you can control all the connected units:
STANDBY BUTTON:
Press this button to start/stop blackout mode on all connected units.
MODE/FUNCTION BUTTONS:
With the MODE button you can select 3 different modes:
 The LED is off: with the FUNCTION button you can select different
strobe modes, like "sound strobe".
 The LED is blinking: with the FUNCTION button you can select
different shows.
 The LED is on: (music mode is temporarily switched off)
 Press the FUNCTION button shortly: to change the colors
 Press the FUNCTION button longer: to change the gobos
BRITEQ
®
Color Speed
000 - 254 Gradual Speed control (fast → slow)
255
Fast
12/69
OPERATION MANUAL
BT-150LS

Publicidad

Tabla de contenido
loading

Tabla de contenido