Construction; Details Only For Pressure Kettles; Laws, Technical Prescriptions And Directives - OFFCAR 80PQE10I Manual De Instrucciones Para Instalación Y Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Main structure in AISI 430 with 4 adjustable height feet.
Panels in stainless steel AISI 304, thickness 10-12/10.
Cooking vat in stainless steel AISI 316, thickness 20/10.
Chrome-plated brass drainage tap.
Lid in stainless steel, hinged and spring balanced in all opening positions.
Jacket and lining in stainless steel AISI 304, thickness 15-20/10.
Heating system comprising shielded heating elements made from "Incoloy-800" alloy with boiler and
steam circulation.
Jacket pressure is controlled by a safety valve set at 0.5 bar; the appliance is equipped with an analogue
pressure gauge.
The cold / hot water connection is 10 mm (mod. 100/150 lt.).
The cold / hot water connection is ½" (mod. 200/300/500/170/270/370 lt.).
Safety thermostat to interrupt operation automatically in case of failures.
The appliance is equipped with a three-position selector with three heating functions:
position "0" Heating not activated
position "1" Reduced power 50%
position "2" Full power 100%
Operating thermostat for temperature adjustment inside the cooking vat.

1.3.1. DETAILS ONLY FOR PRESSURE KETTLES

Stainless steel lid with heat-resistant silicone gasket.
Hermetic closing of lid ensured by 4 screw clamps.
The relief valve for the pressure that develops inside the cooking vat is set at 0,05 bar.
On request, the appliance can be equipped with a pressure gauge indicating the pressure inside the
cooking vat.

1.4. LAWS, TECHNICAL PRESCRIPTIONS AND DIRECTIVES

When installing the appliance it is necessary to follow and comply with the following regulations:
current regulations on the matter;
any hygienic-sanitary regulations concerning cooking environments;
municipal and/or territorial building regulations and fire prevention prescriptions;
current accident prevention guidelines;
electricity board regulations concerning safety;
the regulations of the electrical power supply company or agency;
any other local prescriptions.
Instruction manual for installation, maintenance and use
Electric Kettles

1.3. CONSTRUCTION

- GB -
6 di 19
Page

Publicidad

Tabla de contenido
loading

Tabla de contenido