KTM 45412955044S Manual De Instrucciones página 44

5 ASSEMBLY
18
–
Mount sliding bushing support
special tool.
Guideline
Socket (T727S)
–
Mount upper sliding bushing
Info
Without using a tool, pull the stack slightly apart by
501138-01
hand.
–
Warm up the outside fork tube in area
ding bushing.
Guideline
50 °C (122 °F)
–
Hold lower sliding bushing
special tool.
Mounting tool (T724S)
–
Slide on the outside fork tube.
501139-01
–
Press the sliding bushing all the way into the outside fork
tube.
–
Position support ring
–
Hold seal ring
tool.
Mounting tool (T724S)
–
Press the seal ring and support ring all the way into the
outside fork tube.
501140-01
–
Mount lock ring
The lock ring engages audibly.
–
Mount dust boot
–
Mount fork protector ring
501141-01
–
Push the outside fork tube downwards.
–
Slide on bushing
–
Mount nut
–
Mount adjusting tube
–
Mount and tighten screw cap
Guideline
Special socket (T14084)
501142-01
–
Hold the screw cap and tighten the nut.
cn
and tighten using the
cm
.
A
er
with the longer side of the
es
.
et
with the shorter section of the special
cl
.
bt
.
ck
.
br
.
bq
all the way.
2
(included).
bp
.
of the lower sli-