Planned Maintenance
System: Maintenance
Requirement Card (MRC)
Pictures and additional information:
Corresponding Chapter of Equipment
Manual
When
Weekly
Tools
®
McD
Bun Toaster Release
Agent (HCS)
Customer paper napkins or
paper towels
Protective Gloves
257 Cleaning Tool
Toasters
Prince Castle: Bun Toasters
Precaution
During some checks, live electrical circuits will be exposed, and hot
toasting surfaces will be uncovered.
Hazard Communication Standard (HCS) — The procedures on this card
include the use of chemical products. These chemical products will be
highlighted with bold face letters followed by the abbreviation (HCS) in the
tools portion of the procedure. See the Hazard Communication Standard
(HCS) Manual for the appropriate Material Safety Data Sheet(s) (MSDS).
Applying Bun Toaster Release Agent
IMPORTANT: Use only McD Toaster Release Agent on bun toasters.
Other products may damage bun toasters.
1.
Dust all loose crumbs from toaster surfaces.
2.
Toaster platens must be well rinsed and dry. McD Bun Toaster Release
Agent may be applied to hot toaster platens. Before applying to hot platens,
put on protective gloves.
3.
To coat top platen surface, thoroughly wet a clean, folded customer napkin
or paper towel with Release Agent.
4.
Rub a generous amount of Release Agent over entire surface of a platen until
well coated. Use protective gloves and No. 257 cleaning tool.
5.
Repeat steps 2 and 3 for other platens, including undersides.
IMPORTANT: Platen undersides and difficult to reach areas can be
coated by placing a folded customer napkin or paper towel with Release
Agent on No. 257 cleaning tool to apply Release Agent to platen surface.
IMPORTANT: Do not wipe toaster with a damp cloth after Release
Agent is applied. This removes Release Agent and causes sticking.
6.
If sticking occurs between weekly applications, reapply Release Agent using
steps 1 – 4.
IMPORTANT: Toaster does not need to be recleaned or cooled down
before applying Release Agent.
IMPORTANT: Reapply Release Agent weekly, while toaster is cold
between monthly cleaning, to all platen surfaces.
©2006 McDonald's Corporation
Printed in SEP 2000
Revised in APRIL 2006
Page 1 of 6