Select The Time, Date And Language - Hach LANGE astroTOC UV/Turbo Analyzer Manual Del Usuario

Line voltage 4195-1002/-3002
frequency
CO at span 300 ±30
2
at 50 Hz
(ppm)
CO at span 380 ±30
2
at 60 Hz
(ppm)
Carrier gas 80
1
flow rate
(cc/minute)

Select the time, date and language

Select the time, date and language for the display and CSV (comma-separated value) output.
1. Push Ctrl and the down arrow.
The Service screen is shown.
2. Push the up arrow.
The Setup screen is shown.
3. Push ENTER.
The first option in the Setup menu is shown, "Level Criteria".
4. Push the up arrow until "Timing" is shown, then push ENTER.
5. Push the up arrow until "Times" is shown, then push ENTER.
6. Push the up arrow until "Time/Date" is shown, then push ENTER.
The Set time screen is shown.
7. Use the arrows to scroll through the time and date screens.
Option Description
Set time Sets the time of day in 24-hour clock format.
Set day Sets the day of the month.
Set month Sets the month of the year.
Set year Sets the year.
Date format Sets the date format—USA (mm/dd/yy) or International (dd/mm/yy).
8. Push ENTER to change the value on the screen.
Asterisks flash on both sides of the value.
9. Use the arrows to change the value, then push ENTER.
10. To change the language:
a. Do steps 1–3.
b. Push the up arrow until "Tolerances" is shown, then push ENTER.
c. Push the up arrow until "Language" is shown, then push ENTER.
d. Push ENTER.
Asterisks flash on both sides of the value.
e. Use the arrows to select the language, then push ENTER.
4195-1005/-3005 4195-1006/-3006
750 ±30 800 ±30
950 ±30 900 ±30
80
4195-1007/-3007
3100 ±200
3300 ±200
120 55
4195-1008/-3008
3400 ±200
3600 ±200
100
English 25