Publicidad
Enlaces rápidos
INSTRUCCIONES DE ENSAMBLAJE
SISTEMA DE INSTALACIÓN DE TV DE PANTALLA PLANA
OPTION 1
OPTION 1
OPCIÓN 1
Flat Panel TV Stand
Meuble pour TV à écran plat
Base para panel de TV de pantalla plana
Patent pending / Brevet en instance / Patent pendiente
Made in China / Fabriqué en Chine / Hecho en China
Italian designed / De design italien / De diseño italiano
Do not discard these instructions / Ne pas jeter ces instructions / Conserve estas instrucciones
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D'ASSEMBLAGE
FLAT PANEL TV MOUNTING SYSTEM
SUPPORT DE TÉLÉVISEUR À ÉCRAN PLAT
Stand with TV Mounting System
Meuble avec support de TV
Base con sistema de soporte para TV
82218TP
OPTION 2
OPTION 2
OPCIÓN 2
OPTION 3
OPTION 3
OPCIÓN 3
Stand with Wall Mount
Meuble avec support mural
Base con soporte de pared
M-1_122711v2T
Publicidad
Manuales relacionados para Bell'O Triple Play Pamari 82218TP
Resumen de contenidos para Bell'O Triple Play Pamari 82218TP
- Página 1 ASSEMBLY INSTRUCTIONS INSTRUCTIONS D’ASSEMBLAGE INSTRUCCIONES DE ENSAMBLAJE 82218TP FLAT PANEL TV MOUNTING SYSTEM SUPPORT DE TÉLÉVISEUR À ÉCRAN PLAT SISTEMA DE INSTALACIÓN DE TV DE PANTALLA PLANA OPTION 1 OPTION 2 OPTION 3 OPTION 1 OPTION 2 OPTION 3 OPCIÓN 1 OPCIÓN 2 OPCIÓN 3 Flat Panel TV Stand...
- Página 2 DIRECTED OR FOR THE IMPROPER ASSEMBLY, USE, OR HANDLING OF THIS PRODUCT. ! IMPROPER INSTALLATION OF THIS PRODUCT MAY CAUSE DAMAGE OR SERIOUS INJURY. BELL'O INTERNATIONAL CORPORATION CANNOT BE LIABLE FOR DIRECT OR INDIRECT DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING, INCORRECT USE, OR INCORRECT ASSEMBLY.
- Página 3 à la clientèle au : 1-888-235-7646 (USA/Canada) ou +1-732-972-1333 (International) de 9h00 à 17h00 (heure de l'Est), lundi à vendredi. Bell'O International Corps décline toute responsabilité en cas d'assemblage non conforme aux instructions ou pour l'assemblage, l'utilisation ou la manutention incorrects de ce meuble.
- Página 4 SE ENSAMBLA TAL COMO SE INDICA NI DE SU ENSAMBLAJE, USO O MANEJO INCORRECTOS. ! LA INSTALACIÓN INCORRECTA DE ESTE PRODUCTO PUEDE CAUSAR DAÑOS O LESIONES GRAVES. BELL'O INTERNATIONAL CORPORATION NO PUEDE SER RESPONSABILIZADA POR LOS DAÑOS O LESIONES DIRECTOS O INDIRECTOS CAUSADOS POR EL MONTAJE, USO O ENSAMBLAJE INCORRECTOS.
- Página 5 PARTS LIST / NOMENCLATURE DES PIÈCES / LISTA DE PIEZAS 20 mm 32 mm 60 mm 15 mm...
- Página 6 TV MOUNTING SCREWS / VIS DE FIXATION DE TV / TORNILLOS DE MONTAJE PARA TV Quantity Quantity Part / Pièce / Pieza Part / Pièce / Pieza Quantité Quantité Cantidad Cantidad TVM1 TVM7 8 x 20 mm 4 x 15 mm TVM2 TVM8 4 x 30 mm...
- Página 7 OPTION 1: FLAT PANEL TV STAND OPTION 1: MEUBLE POUR TÉLÉVISEUR À ÉCRAN PLAT OPCIÓN 1: BASE PARA PANEL DE TV DE PANTALLA PLANA NOTE: 2 PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS FURNITURE. TO AVOID DAMAGE DURING ASSEMBLY, IT SHOULD BE ASSEMBLED ON A SOFT SURFACE. REMARQUE : IL EST CONSEILLÉ...
- Página 8 Fig. 1-2 (View from Front) (Vue de l'avant) (Vista desde la parte frente) 1-3. ATTACH the Rear Glass Shelf Support Clips (M18) to the front of the CMS ® Frame (M4) with small Screw (M19). 1-4. SCREW the Front Shelf Support Posts (M20) into the predrilled holes in sides of the Legs (M2). NOTE: Make sure the soft glass pads on the Front Shelf Support Posts (M20) are facing UP before attempting to install the Glass Shelves.
- Página 9 OPTION 2: FLAT PANEL TV MOUNTING SYSTEM OPTION 2: SUPPORT DE TÉLÉVISEUR À ÉCRAN PLAT OPCIÓN 2: BASE CON SISTEMA DE SOPORTE PARA TV DE PANTALLA PLANA Fig. 2-1 (View from Rear) (Vue depuis l'arrière) (Vista desde la parte trasera) (View from Front) (Vue de l'avant) (Vista desde la parte frente)
- Página 10 Fig. 2-2 (View from Rear) (Vue depuis l'arrière) (Vista desde la parte trasera) 2-3. SLIDE Monitor Arms (M8) on to the Swivel Bar (M7) and then INSERT the Knobs (M16) through the Monitor Arms as shown. DO NOT YET FULLY TIGHTEN THE KNOBS. 2-3.
- Página 11 MOUNTING THE TELEVISION POSE DU TÉLÉVISEUR INSTALACIÓN DEL TELEVISOR CAUTION: CAREFULLY DETERMINE THE CORRECT MOUNTING PROCEDURE TO PREVENT DAMAGE TO YOUR TV AND/OR PAMARI ® MOUNTING SYSTEM. ALWAYS REMOVE THE TELEVISION & COMPONENTS BEFORE ATTEMPTING TO MOVE THE STAND. ATTENTION : DÉTERMINER AVEC ATTENTION LA PROCÉDURE DE POSE CORRECTE POUR ÉVITER D'ENDOMMAGER LE TÉLÉVISEUR OU LE SYSTÈME DE FIXATION PAMARI ®...
- Página 12 Fig. 2-4 (View from Rear) (Vue depuis l'arrière) (Vista desde la parte trasera) 2-5. PLACE your TV face-down on a very soft, non-abrasive surface, taking extreme caution to not damage the face of your TV. 2-6. Attach each Monitor Arm (M8) to the back of your television as shown. Make sure that each Washer is placed between the Screw and the Monitor Arm.
- Página 13 Fig. 2-5 2-8. MOVE the stand to the location it will occupy when fully assembled and in use. 2-9. With the help of an assistant, carefully PLACE the Post of the Swivel Bar (M7) down into the tube in the Mounting Bracket (M6), and SECURE with the Post Locking Clip (M17) as shown.
- Página 14 OPTION 3: STAND WITH WALL MOUNT OPTION 3: MEUBLE AVEC SUPPORT MURAL OPCIÓN 3: BASE CON SOPORTE DE PARED CAUTION: NEVER EXCEED THE MAXIMUM LOAD CAPACITY OF 125 LBS (56.7 KG) ATTENTION : NE JAMAIS DÉPASSER LA CAPACITÉ DE CHARGE MAXIMALE DE 56,7 KG (125 LBS) ADVERTENCIA: NUNCA EXCEDA LA CAPACIDAD MÁXIMA DE CARGA DE 125 LBS (56.7 KG) 3-1 Using a stud finder, FIND the exact location of the studs to which you want to attach the Wall Mount (M11).
- Página 15 Fig. 3-3 INSTALLING THE WALL MOUNT IN WOOD: 3-4. DRILL four holes 2.5" (64 mm) deep using a 5/32" (or 4 mm) size drill bit in the “A”, “B”, “C”, and “D” locations noted on the Installation Template. POSER LE SUPPORT MURAL SUR DU BOIS: 3-4.
- Página 16 Fig. 3-6 3-5. REMOVE the Installation Template. 3-6. If mounting into concrete, INSERT four TOGGLER ® brand Wall Anchors (M22) into the drilled holes. [FIGURE 3-8] 3-7. PLACE the Wall Plate (M11) over the holes and SCREW in the Lag Bolts (M23) about half way.
- Página 17 Fig. 3-9 3-8. ATTACH the Mounting Bracket (M6) to the Wall Plate (M11) with four 15 mm Bolts (M15). Tighten fully. 3-8. FIXER le support de fixation (M6) sur la plaque murale (M11) avec quatre boulons de 15 mm (M15). Serrer complètement.
- Página 18 Fig. 3-10 3-9. With the help of an assistant, carefully PLACE the Post of the Swivel Bar (M7) down into the tube in the Mounting Bracket (M6), and SECURE with the Post Locking Clip (M17) as shown. 3-9. Avec l’aide d’une autre personne, ENFILER avec précaution la tige de la barre pivotante (M7) dans le tube du support de fixation (M6) et la FIXER avec la goupille de blocage (M17) comme sur l’illustration.
- Página 19 INSTALL THE GLASS SHELVES POSE DES PLATEAUX EN VERRE INSTALACIÓN DE LOS ESTANTES DE VIDRIO CAUTION: ALWAYS REMOVE THE GLASS SHELVES BEFORE ATTACHING/REMOVING YOUR TELEVISION, OR BEFORE ATTEMPTING TO MOVE THE STAND. ATTENTION : VEILLER À TOUJOURS ENLEVER LES PLATEAUX EN VERRE AVANT D'ACCROCHER/DÉCROCHER LE TÉLÉVISEUR OU DE TENTER DE DÉPLACER LE MEUBLE.
- Página 20 W RR NTY • One (1) Year Limited Warranty All Company furniture products are warranted, with the exception of glass, to the original purchaser at the time of purchase and for a period of one (1) year thereafter. Glass is warranted to the original purchaser at the time of purchase and for a period of thirty (30) days thereafter.