Technical Specifications - Sevylor POINTER K1 Manual De Utilización

Dear customer,
Congratulations on your purchase of a Sevylor inflatable product. We take pride in bringing you a quality product which will
offer you years of pleasure. Your new item is an investment which deserves your care and attention. These instructions
have been compiled to help you to operate your product safely. It contains details of the product, its equipment, and
information on its operation and maintenance. Read it carefully and familiarise yourself with the inflatable before first use,
in order to ensure safe use and prevent tragic accidents.
The warnings below relate to various situations. Please observe them.
Denotes an imminent hazard which will result in severe injury if you do not comply with the
CAUTION !
instructions.
WARNING ! Reminds you of safety measures which must be observed. Also denotes unsafe practices which
could result in personal injury or damage to the product or property, if you do not comply with the
instructions.
It is the owner's responsibility to make sure that all users carefully read and follow the instructions for the safe
operation of this product. Observe all local and national laws. Always wear a Personal Flotation Device
approved by proper authorities. Please observe carefully the information on the capacity plate which is printed
on the product.
Your kayak fulfils the requirements of EN ISO 6185-1 standard, TYPE III.
The models POINTER K1 and POINTER K2 are certified by the TÜV and are NMMA certified.

TECHNICAL SPECIFICATIONS

Model Length
inflated appr.
POINTER K1 305 cm / 120"
434 cm / 171"
POINTER K2
N.B. The inflated sizes are measured under the following conditions ; product inflated with the recommended inflator, at
the recommended working pressure and at a temperature ranging between 18° C / 64° F and 22° C / 71° F.
Model Persons
capacity
1 adult
POINTER K1
2 adults
POINTER K2
FITTING
Illustrated model: K2
Side chamber with
Boston valve
2 Drain plugs
Handle
Plate system
I-beam floor with
push-in valve
Side chamber with
Boston valve
1)
Adjustable bucket seats - POINTER K1 : 1 ; POINTER K2 : 2 ;
2)
Removable fin - POINTER K2 only ; POINTER K1 : the fin is not removable ;
3)
Paddle holders - POINTER K1 : on one side chamber ; POINTER K2 : on both side chambers.
All models come with manometer (except for the models for the U.S.A) and carry bag.
CAUTION !
Width
inflated appr.
81 cm / 32"
88 cm / 32"
EN ISO 6185-1
Max. load capacity
136 kg / 300 lbs
180 kg / 397 lbs
Cargo Hatch
1
2
1
Removable fin
on the underside
Weight
13 kg/ 29 lbs
19 kg / 42 lbs
NMMA Max. Payload
Capacity (Persons & Gear)
300 lbs
600 lbs
Zipper to open nylon outer hull & get
3
Paddle holders
access to PVC inner hull (front + rear
+ central)
2
Directional strakes on the
Adjustable
1
underside
bucket seats
3
E
N
G
L
I
S
H
Spray cover with
bungee cords
Handle
Plate system
Outer nylon hull
Figure 1