Technical Specifications - Sevylor HUDSON KCC360 Manual De Utilización

Dear customer,
Congratulations on your purchase of a Sevylor inflatable product. We take pride in bringing you a quality product which
will offer you years of pleasure. Your new item is an investment which deserves your care and attention. This manual
has been compiled to help you to operate your product with safety and pleasure. It contains details of the product, its
equipment, and information on its operation and maintenance. Read it carefully and familiarize yourself with the
inflatable before using it in order to ensure the safe use and prevent tragic accidents.
The warnings below are advisories relative to various types of situations. Please observe them.
CAUTION ! Denotes an immanent hazard which will result in severe injury if you do not comply with the
instructions.
WARNING ! Reminds you of safety measures which must be observed. Denotes also unsafe practices which
could result in injury , or product or property damage if you do not comply with the instructions.
It is the owner's responsibility to make sure that all users will carefully read and follow the manual and
instructions for the safe operation of this product. Observe all local and national laws. Always wear a coast
guard approved Personal Flotation Device. Please observe carefully the information on the capacity plate
which is printed on the item.
Your canoe/kayak fulfils the requirements of EN ISO 6185-1 standard, TYPE III.
The model KCC360 is certified by the TÜV.

TECHNICAL SPECIFICATIONS

Sevylor Stearns
Model # Model #
KCC360 U245BLU
N.B. The inflated sizes are measured under the following conditions ; product inflated with the recommended inflator, at
the recommended working pressure and at a temperature ranging between 18° C / 64° F and 22° C / 71° F.
FITTINGS
Floor chamber with
push-in valve
Main chamber with
Boston valve
Drain plug
Lift handle
Main chamber with
Boston valve
Removable fin
1
) Removable fin on the underside : see the assembly procedure.
This model comes with a PVC dry bag and a
ASSEMBLY INSTRUCTIONS / INFLATION
Do not use a sharp tool !
For the first inflation and in order to get acquainted with your new product, inflate indoors at room temperature where
the PVC will be soft and assembly process made easier.
Length Width
inflated appr. inflated appr.
363 cm / 143" 89 cm / 35"
Stern bag
1
3
2
1
1
Handles
manometer.
CAUTION !
Weight
15 kg / 33 lbs
Adjustable bucket seats with
with
elevated seating position
push in valve
3
Paddle holders (left
and right sides)
CAUTION !
3
Persons capacity Max. load
capacity
2 adults + 1 child 230 kg / 507 lbs
Zipper to open nylon outer hull &
get access to PVC air chambers
(front, rear, left, right) + zipper on
the floor (front and rear)
3
Moulded
directional strakes
Nylon outer hull
E
N
G
L
I
S
H
Spray cover with
bungee cords
and zipper
Lift
handle
Figure 1