Connecting Diagram Flow Control - Abicor Binzel CR1000 Instructivo De Servicio

13 Appendix
Pos.
16
17
18
19
20
Tab. 11

13.3 Connecting diagram flow control

NOTICE
• This connection option is only suitable for 2-cycle mode.
• The cooling unit disconnects the welding current if the coolant level is low and the torch trigger is
• The flow control is preset to 0.6 – 0.8 l/min.
Welding power source
Torch control switch
at welding power source
Fig. 10 Connecting diagram flow control
EN - 22
Item description
Support for coolant container
Coolant container bracket (x 2)
Coolant container
Outlet neck screw cap
Filler neck screw cap
CR1250 spare parts
pressed.
Torch trigger
Connection housing
CR1000/CR1250
Flow control connector
at front of cooling unit
Flow control
(low cooling liquid volume opens
switch)