Technical Data; Accessories; Assembly - Hyper Tough HT19-401-003-04 Manual Del Operador

Voltage
Bar length
Chain speed
Oil tank capacity
Chain pitch
Battery Capacity
Charger rating
Charging time
Weight (chain & bar included)
The accessories of battery charger (HT19-401-003-13 /ACG318W1U) and battery pack (ABP118T7/
HT19-401-003-17 ) illustrated or described are not included in HT19-401-003-04 delivery.
Battery pack (ABP118T)
Charger ( HT19-401-003-14 )
Blade protection cover
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel can assist you and offer advice.
WARNING! Do not install the battery pack before it has been completely assembled. Always wear
gloves when handling the bar and chain. These components are sharp and may contain burrs.
CHAIN AND GUIDE BAR ASSEMBLY
1. Unpack all parts carefully.
2. Remove the blade protection cover. (See Fig. A1)
3. Grip the chain tensioning outer rim and turning it anti-clockwise to loosen the chain. (See Fig. A2)
4. Hold and depress the cover tightening stick, turning it anti-clockwise to remove the chain cover. (See Fig. A3)
5. Place the chain saw on a solid, level surface.
6. Slide the chain in the slot around the guide bar. Ensure the chain is in correct running direction by referring
to the chain direction symbol found on the saw body. Ensure the bar tensioning plate is facing outward. (See
Fig. A4)
NOTE: Hold the bar vertically and slide the chain from the top of the bar. It will help you to smoothly assemble

TECHNICAL DATA

ABP118T
ABP118T7
HT19-401-003-17
HT19-401-003-14
HT19-401-003-13
ACG318W1U

ACCESSORIES

2
1
1

ASSEMBLY

12
40V Max
12"
19.7 ft/s
6.1 oz
3/8"
2.5Ah
2.0Ah
2.5Ah
120V~60Hz, 50W 20V
120V~60Hz, 75W 20V
120V~60Hz, 18W 20V
150mins for 2 batteries
7.7 lbs
, 2.0A
, 3.0A
, 0.7A