2-4-27 Post #8 Guide Ass'y Removal
1) Rotate the Post #8 Guide Ass'y 1 in the direction of arrow to
lift up.
1 POST #8 GUIDE ASS'Y
Fig. 2-40 Post #8 Guide Ass'y Removal
2-4-28 Lever Head Cleaner Ass'y Removal
1) Release the Hook 1.
2) Lift the Lever Head Cleaner Ass'y 2.
Fig. 2-41 Lever Head Cleaner Ass'y Removal
2 LEVER HEAD CLEANER ASS'Y
1 HOOK
SLEEVE-HEAD CLEANE
2-4-29 How to Eject the Cassette Tape
(If the unit does not operate on condition
that is inserted into housing ass'y)
1) Turn the Gear worm 1 clockwise with screw driver.(Refer to
arrow)
(Other method: Remove the Screw of Motor Load Ass'y,
Separate the Motor Load Ass'y)
2) When Slider S,T are approched in the position of unloading,
rotate holder Clutch counterclockwise after inserting screw driver
in the hole of frame's bottom in order to wind the unwinded
tape.
(Refer to Fig.2-43)
(If you rotate Gear Worm 1 continuously when tape is in state
of unwinding, you may cause a tape contamination by grease
and tape damage.
Be sure to wind the unwinded tape in the state of set horizently.)
3) Rotate Gear Worm 1 clockwise using screw driver again up to
the state of eject mode and then pick out the tape.(Refer to Fig.2-
42)
FRAME
2-20
1 GEAR WORM
Fig. 2-42
Fig. 2-43