Nolan N91 EVO Seguridad E Instrucciones página 5

WARNING! In this configuration, the chin guard cannot be closed again. Do not force the closing of the chin guard
because it could cause damages in the helmet's closing mechanism. To proceed with closing the chin guard, it is
necessary to push the locking lever to position P (Fig. B, lever downwards).
Fig. B (lever downwards)
When the side locking lever is in position "P" (Fig. B, lever downwards), the chin guard can be opened and/or closed.
WARNING!!!
- The protection level of this helmet whilst riding the vehicle depends upon the configuration adopted by the user:
total protection if the chin guard and visor are closed, partial protection if the chin guard and visor are open.
- Do not use the helmet without the chin guard.
- Do not use the helmet in case of chin guard malfunctioning. Immediately contact a Nolan authorized dealer.
- Do not remove nor tamper the fixing screws that connect the chin guard to the shell.
• VISOR MECHANISM SYSTEM
1 DISASSEMBLY
1.1 Open the visor completely.
1.2 By pressing the visor release button (A), slide the visor forwards until you hear a click (Fig. 4).
1.3 Release the visor fastenings (B 1 and B 2) from their seat (Fig. 5).
1.4 Repeat the same steps on the other side of the helmet.
Important!: do not remove the visor's opening and closing mechanisms from the chinguard.
2 ASSEMBLY
2.1 Set the visor in open position by placing the visor fastenings (B 1 and B 2) into their seats in the visor mechanism (Fig. 5).
2.2 Insert fastening B 1 in the housing provided and press the visor against the shell in line with fastening B 2.
2.3 Slide the visor backwards until the visor locks into place.
2.4 Repeat the same steps on the other side of the helmet.
WARNING! In this configuration, the chin guard cannot be closed again. Do not force the closing of the chin guard
because it could cause damages in the helmet's closing mechanism. To proceed with closing the chin guard, it is
necessary to push the locking lever to position P (Fig. B, lever downwards).
Fig. B (lever downwards)
When the side locking lever is in position "P" (Fig. B, lever downwards), the chin guard can be opened and/or closed.
WARNING!!!
- The protection level of this helmet whilst riding the vehicle depends upon the configuration adopted by the user:
total protection if the chin guard and visor are closed, partial protection if the chin guard and visor are open.
- Do not use the helmet without the chin guard.
- Do not use the helmet in case of chin guard malfunctioning. Immediately contact a Nolan authorized dealer.
- Do not remove nor tamper the fixing screws that connect the chin guard to the shell.
• VISOR MECHANISM SYSTEM
1 DISASSEMBLY
1.1 Open the visor completely.
1.2 By pressing the visor release button (A), slide the visor forwards until you hear a click (Fig. 4).
1.3 Release the visor fastenings (B 1 and B 2) from their seat (Fig. 5).
1.4 Repeat the same steps on the other side of the helmet.
Important!: do not remove the visor's opening and closing mechanisms from the chinguard.
2 ASSEMBLY
2.1 Set the visor in open position by placing the visor fastenings (B 1 and B 2) into their seats in the visor mechanism (Fig. 5).
2.2 Insert fastening B 1 in the housing provided and press the visor against the shell in line with fastening B 2.
2.3 Slide the visor backwards until the visor locks into place.
2.4 Repeat the same steps on the other side of the helmet.
5
5