Intercom Panel Wiring; D - Configuration; Adjustments And Operation; Internal Call - THOMSON 512190 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 82

d - CONFigurATiON

1 - ADjUSTMENTS AND OPERATION

The handset and the intercom panel must be paired
in order to work together. This procedure is done in
the factory. If, however, it is necessary to reset the
pairing, this is the procedure to use:
• Find the pairing button on the back of the
intercom panel and remove the protective
cover.
• Press and hold the pairing button on the
handset charger base for 5 seconds, then
release.
• Press the intercom panel call button, then,
using a fine-tipped tool, press and hold the
pairing button on the intercom panel for at least
5 seconds.
• Pairing is completed.

2 - INTERNAL CALL

• Pressing the name plate on the intercom panel
makes then handset ring for several seconds.
• Answer by pressing the
with your visitor.
• If you have installed the strike plate command
12
EN
Wireless audio intercom

3 - ExTERNAL CALL

4 - SCREEN SYMbOLS

near the base, it flashes if the handset is too far from
the base.
screen when answering the phone or when taking a
call from the intercom panel.
free feature is activated. The speaker is heard over
the loudspeaker on the back of the handset.
the keypad has been locked to avoid accidental
handling.
or several calls have not been answered.
life. The indicator flashes when recharging and
button to speak
stops flashing if the handset is not in its base or if
charging is finished.
module, press and hold the
least 5 seconds to trigger the opening.
• Once the conversation has ended, hang up
with the
key.
• If you do not hang up, the conversation will
automatically end after 120 seconds.
• Once connected to the phone network,
your wireless audio intercom works like a
conventional telephone.
• To make a call, pick up with the
and then dial the telephone number.
• Once the conversation has ended, hang up
with the
key.
• If someone calls you, the handset rings. The
ring that is used is different from the ring
emitted when pressing the call button on the
intercom panel.
• Answer by pressing the
Signal: is on and solid when the handset is
Communication in progress: appears on the
Hands free indicator: indicates that the hands
Locked keypad indicator: appears when
Missed call indicator: appears when one
Battery indicator: indicates handset battery
key for at
button
button to speak.

Publicidad

Tabla de contenido
loading

Tabla de contenido