E - Operation; Liste App" [Call List] Menu; Répertoire" [Directory] Menu; Réglages Bs" [Bs Settings] Menu - THOMSON 512190 Manual Del Usuario

E - OpErATiON

1 - "LISTE APP" [CALL LIST] MENU

Lets you see the number of missed calls recorded if
the phone network provides this service.
• If the caller is saved in the directory, his/her
name appears.
• Note: the missed call log is usually accessible
from the main screen using the
2 - "RéPERTOIRE" [DIRECTORY] MENU
Lets you save the names and numbers of people
likely to call/frequent calls to avoid having to enter
the phone number.
• Ajout Fiche [Add Entry]: add a new entry.
The handset indicates and successively waits
for the user name, number and ring tone if this
number is recognised during an incoming call
(subject to this service being available on the
phone line used).
• Modif Fiche [Mod Entry]: modifies an
existing entry.
• Supp. Fiche [Del Entry]: deletes an entry
from the directory.
• Tout Supp [Del all]: completely deletes the
directory.
• Etat Repert [Dir Status]: indicates the
number of entries made. Up to 50 names and
numbers can be entered in the directory.
• Mém. Pleine [Mem Full]: means that all of the
files are full.
3 - "RéGLAGES bS" [bS SETTINGS] MENU
Access settings specific to the telephone
base connected to the phone network.
• Sup Combiné [Del Hand]: delete the handset
used from the base memory. The handset must
be re-paired with the base for the product to
work.
• Mode Num [Dial Mod]: select the type
of dialling that the base should use to dial a
number: vocal/decimal.
• Temps «flash»
the duration of the "R" key action during
communication to put it on hold or transfer the
call, for example (subject to this service being
available on the phone line in use).
• Modifier PIN [Modify PIN]: modify the PIN
code requested by the handset when pairing
the handset with the base. The default code
is "0000" and the pairing between the handset
14
EN
key.
[Flash Time]: select
Wireless audio intercom
and base is made in the factory.
• RAZ base [RES base]: resets all factory
settings.
4 -"HS SETTINGS" MENU (IN ENGLISH: HS
SETTINGS)
Access settings specific to the handset.
• Alarme [Alarm]: the handset has an alarm
feature. If you activate this feature, the handset
asks the desired time, then it activates whether
the loudspeaker is used when the alarm rings.
• Régl Audio [Audio volume]: adjust the
loudspeaker ring
volume for the rear loudspeaker used during
communication in hands-free mode, V speaker
for the handset speaker.
• Réglmelodie [Set Ring]: select the ring tones
to use and the corresponding ring volume. App
int [Int Call] corresponds to pressing the button
on the intercom panel, App ext [Ext Call] for an
incoming call.
• Réglage Tona [Set Tone]: enable or disable
the audible beeps when pressing the handset
keys.
Note: certain features always emit a noise
regardless of this setting. Example: reaching the
end of the list and returning to the start of the list.
• Langue (by default: Language): choose
the handset display language. The available
languages are: English, German, French,
Italian, Spanish, Dutch, traditional Chinese.
• Nom Combiné [Hand Name]: select the
name of the handset that will appear next to
the time when the handset is in standby or
recharging.
• Réponse Auto [Auto Ans]: select if, when
answering an incoming call, picking up the
handset from the base answers the call.
• Contraste [Contrast]: default setting 14.
Contrast can be adjusted between 0 and 16
using the up/down keys.
• Date & Heure [Date & Time]: sets the date
and time on the handset screen.
• Select base: if several bases are nearby, the
handset can be re-paired with the desired
base.
• RAZ Combiné [RES Handset]: resets all
handset settings to factory settings.
volume: Loudspeaker