Set "Hard Drive Boot Priority - Kingston Hyper X Manual Del Usuario

Set "Hard Drive Boot Priority"

Your system is now configured with two bootable drives. In order to boot from your new SSD
drive, you must enter the system BIOS to set "Hard Drive Boot Priority" so that your new SSD
drive is set to boot first. Perform the following:
1. Restart your computer. While the system is restarting, activate the system setup program
(BIOS) by repeatedly pressing a special key such as ESC, F1, F12 or DELETE.
(Consult your computer system's documentation for the correct key.)
2. While in the BIOS, change the "Hard Drive Boot Priority" so that the disk labeled
"SSDxxxx" is in the first position.
3. Exit BIOS by pressing the ESC key. Save changes when prompted.
4. Restart the computer. When the computer restarts, it should now boot to your new SSD
drive.
Note: Your original system hard drive can now be used as a secondary data disk for
data storage and should be viewable via My Computer (Computer in Vista).
SSD
Desktop / Notebook
13