Setup And Use Acronis ® True Image Hd - Kingston Hyper X Manual Del Usuario

Setup and Use Acronis
IMPORTANT: It is strongly recommended that you uninstall any Trial versions of
Acronis software prior to installing a full version.
1. Insert the Acronis True Image HD software into the system CD-ROM drive.
2. Restart the system.
3. The Acronis True Image HD CD is a bootable disk and will boot to the Acronis True
Image HD screen.
Note: If the system does not boot to the Acronis True Image HD screen and instead
boots to Windows or fails to boot at all, perform the following:
1) Restart the computer. While the system is restarting, run the system setup
program (BIOS). The system BIOS can be activated by pressing a special
key such as ESC, F1, F12 or DELETE. (Consult your computer system's
documentation for the correct key.)
2) While in the system BIOS, change the boot order so that CD-ROM is the
first boot device.
3) Save the settings and exit BIOS. (For more detailed instructions on
configuring the BIOS, consult your computer system's documentation.)
4) Restart the computer. When the computer restarts, it should now boot to
the Acronis True Image HD page.
®
True Image HD
SSD
Desktop / Notebook
15