Kingston Hyper X Manual Del Usuario página 19

7. If prompted, select the Source and Target Disk. Click Next to continue.
8. The Hard Disk Drives Structure screen will appear (Figure 11). Click Proceed.
Note: The original partition sizes will be scaled according to the new drive size. If the
new drive is smaller in capacity than the original drive, the partitions will shrink
accordingly. If the new drive is larger than the original drive, the partitions will be
enlarged proportionately.
9. An operation progress bar will indicate data transfer (Figure 12). Once the cloning
process is complete, a Disk Cloning was successful window will appear. Click OK.
10. Remove the Acronis True Image HD software CD and close the program. The system
will automatically reboot to the new SSD drive.
Note: The drive in the external enclosure can now be used as secondary storage.
Figure 11: Hard Disk Drives Structure
Figure 12: Acronis Operation Progress
SSD
Desktop / Notebook
18