Parts Listing - body Power BRM8981 Manual Del Usuario

# Description
01 Monitor
01a Monitor Wire (Upper)
02 Screw (M4x12 mm)
03 End Cap (φ25x22xφ52 mm)
04 Hand Pulse Bar
05 Washer (d6xφ12x1.0 mm)
06 Screw (ST4.0x19 mm)
07 Hand Pulse Sensor
08 Foam (φ23x5x500 mm)
09 Wire Cap
10 Spring Washer (d8)
11 Crank Spacer
12 End Cap (φ32x22xφ50 mm)
13L/R Lef/Right Handle Bar
14 Carriage Bolt (M8x43x20xH3 mm)
15 Foam (φ30x5x630 mm)
16 Arc Washer (d8xφ20x2xR16 mm)
17 Nylon Nut (M8xH7.5xS13 mm)
18 Front Stabilizer
19 Spacer (φ32x3xφ28x21xφ19.4 mm)
20 Special Washer (d19xφ25x0.3 mm)
21 Spacer (φ31.8φ19.2x54 mm)
22 Hex Bolt (M8x16xS14 mm)
23 Washer (d8xφ32x2.0 mm)
24 Spacer (φ32x3xφ28x16xφ14.3 mm)
25L/R Left/Right Coupler Bar
26F/R Left Coupler Bar Shroud
27F/R Right Coupler Bar Shroud
28 Center Post
29 Bolt (M8x16xS6 mm)
30 Washer (d8xφ16x1.5 mm)
31 Arc Washer (d8xφ20x2xR30 mm)
32 End Cap (J60X30X15 mm)
33L/R Right Pedal Tube Shroud (Front)
34 Screw (ST4.2x16Xφ8 mm)
35 Hex Bolt (M8x75x13xS14 mm)
36L/R Left/Right Pedal Tube
37L/R Left/Right Pedal
38 Hex Bolt (M8x45x20xS14 mm)
39 Knob Bolt (M8xφ60x30 mm)
BRM8981
BRM 3670 Stride Cycle

Parts Listing

The following parts list describes all of the parts illustrated on the
exploded diagram on the following page. Please note, most of
these parts are already pre-assembled on your unit.
#
40
41
42
43
44
45
46L/R
47L/R
48L/R
49
50
51
52
53
54
55
56F/R
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
Description
C Shaper Washer (d40 mm)
Bearing (2203-2RS NBK)
Washer (d8.2xφ25x2.5 mm)
Bolt (M8x20xS13 mm)
Crank Cover
Tool 1 (S13-14-15)
Left Pedal Tube Shroud (Front)
Main Frame Shroud 1
End Cap for Front Stabilizer
Washer (d5xφ13x1.0 mm)
Monitor Wire (Middle)
Bolt (M8x50x20xS6 mm)
Rear Stabilizer
End Cap for Rear Stabilizer
Screw (ST4.2x19Xφ8 mm)
Screw (ST4.2x25Xφ8 mm)
Center Post Shroud
Main Frame Shroud 2
Spacer (φ14xφ8.3x59 mm)
Monitor Wire (Lower)
Main Frame
Hand Pulse Wire
T Shape Bolt (M8x60x20 mm)
Knob Bolt (M16x1.5x15xφ49 mm)
Seat Post Sleeve
Seat Post
Knob Bolt (M10xφ58x32 mm)
End Cap (口38 mm)
U Bracket
Horizontal Seat Ba
Seat
Ac Adapter
Washer (d10xφ20x2.0 mm)
Water Bottle Holder
Washer (d4xφ12x1.0 mm)
Screw (M4x12 mm)
Tool 2 (S13-14)
Tool 3 (S6)
Screw (ST4.2x25Xφ8 mm)
Washer (d4xФ12x1.0 mm)
Page 4
Page ?