Sono Swiss SW Dura T Serie Manual De Istrucciones página 48

5.1 Unpacking and setting up
• Permissible temperature changes of the unit environment and of the bath liquid: Non-condensing, i.e. no condensate forming on the unit
surfaces. A table specifying the dew points based on the initial temperature of the unit environment and the humidity is available from the manufacturer
upon request. Dew point: Temperature below which condensation occurs.
• Indoor operation only
• Operation at max. 2000m above sea level
5.2 Connecting unit to power mains
Required mains conditions
The connection conditions must match the technical specifications on the rating plate. See also Technical Data (chapter 4.6).
Connecting mains cable
The unit may only be connected to an earthed CEE 7/3 socket.
The mains plug may only be connected to an easily accessible socket as it is considered a disconnecting device!
48 | EN
SONOS_2019_01_Gebrauchsanleitung_DURA-T-und-S_lay06-P.indd 48 24.04.19 15:52