Installing The Detector As Part Of A Network - DAITEM SH151AX 3 Manual De Instalación

GB
2.6 Installing the
detector as part
of a network
It is possible to interconnect up
to 40 detectors so that all the
detectors in the home as well as
the alarm system can be
triggered together.
The responses to detection are
described in chapter 1.1 How the
detector works.
Installing detectors in a network
Connecting radio detector in a network.
All the radio detector must be recognized and in radio range with the control panel.
To connect the detectors in a network:
1. Put all the detectors to be networked in recognition programming mode by pressing 2
times on the Cfg1 key. The red LED flashes.
108
Alarm
control
panel
Detectors