Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-344-006.book Page 30 Monday, January 23, 2017 8:52 AM
30 | English
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Blade guard
2 Lock-on button for On/Off switch
3 On/Off switch
4 Auxiliary handle (insulated gripping surface)
5 Spindle lock button
6 Scale for mitre angle
7 Wing bolt for bevel-angle preselection
8 Wing bolt for parallel guide
9 Cutting mark, 45°
Technical Data
Circular Saw
Article number
Rated power input
No-load speed
Rotational speed under load, max.
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.25 ohm.
1 609 92A 35X | (23.1.17)
10 Cutting mark, 0°
11 Parallel guide
12 Retracting blade guard
13 Lever for retracting blade guard
14 Base plate
15 Wing bolt for bevel-angle preselection
16 Chip ejector
17 Hex key
18 Clamping bolt with washer
19 Clamping flange
20 Saw blade*
21 Mounting flange
22 Saw spindle
23 Fastening screw for extraction adapter*
24 Extraction adapter*
25 Clamping lever for cutting-depth preselection
26 Cutting-depth scale
27 Set of screw clamps*
28 Guide rail*
29 Connection piece*
30 Vacuum hose*
31 Guide-rail adapter*
32 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GKS 235
3 601 E7A 0..
W
2100
-1
min
5000
-1
min
3500
mm
85
mm
65
mm
383 x 170
mm
235
mm
230
mm
2.2
mm
3.2
mm
2.0
mm
25
kg
7.6
/ II
GKS 235
3 601 E7A 0..
2100
5000
3500
85
65
383 x 170
235
230
2.2
3.2
2.0
25.4
7.6
/ II
Bosch Power Tools
Publicidad
